Description
BRAND NEW W/FREE FREIGHT---Danuser SM40 Post driver w/Grapple and Tilt. We are a Danuser dealer so this unit will have full 1-year warranty from the date of purchase.
Model SM40 has a 40” drop hammer design with up to 35 strokes per minute. With this innovative design, you can achieve a full stroke with every cycle or utilize the short stroke feature to fine tune your depth. The Hammer DOES NOT operate with springs, hydraulic cylinder, or return line. Grapple option can be added to any model for a true one-person operation (does not include t-posts). The grapple option will allow the operator to grab the post off the ground, load it into the machine, and drive it in the ground without leaving the skid-steer seat. Tilt option allows up to 20˚ in each direction. The hammer weight is 300 lbs. from the factory. Additional weight can be added for a total of 500 lbs (not included). The unit also has an integrated post puller to be used with log chain.
NOTE: If post/pipe diameter is 5″ or smaller and you have a helper, PN 21395 Donut Strike Plate must be purchased separately. If driving with one person, PN 21212 Horseshoe Strike Plate is a better option.
Unit Drives
Fence Posts
Sign Posts
Guard Rails
Median Dividers
Tent Stakes
T-Posts
Pipe Fence
Railroad Ties
Free Freight to any Business or Farm address in the Lower 48 States (with dock or forklift). Additional charge of $100 for a lift gate if you can not unload the pallet. Call Jon @ with questions.
Terms and Conditions of Sale:
Items are available for inspection, and any bidder is solely responsible for personally inspecting the item and verifying any information presented here or elsewhere. Call Jon @ to schedule an appointment to inspect the equipment.
Winning bidder must contact Stillwell Sales, LLC within 24 hours of auction close. Buyer is responsible for shipping. Payment due in full within 3 business days after sale concludes. Accepted forms of payment are Wire Transfer, Cash or Certified Bank Check at pick-up.
Sales Tax: Buyer is required to pay 7.5% Kansas sales tax unless exempt for farm use or resale. All equipment shipped outside the state of Kansas by freight truck will be exempt from tax with a signed bill of lading from the freight carrier. Buyers from out of state coming into our location to pick-up the equipment will be required to pay sales tax unless an exemption applies.Specifications
CategoryOther
Year2026
ManufacturerDANUSER
ModelSM40
Serial Number3333
ConditionNew
CategoryOther|
Year2026|
ManufacturerDANUSER|
ModelSM40|
Serial Number3333|
ConditionNew|
Fits to
CASE
DEERE
BOBCAT
CATERPILLAR
GEHL
KUBOTA
NEW HOLLAND
CASE|
DEERE|
BOBCAT|
CATERPILLAR|
GEHL|
KUBOTA|
NEW HOLLAND|
