New Ashland 3413E Ejector Scraper
Contact to order
The 3413E is one of the four new ejector scrapers introduced this year requiring 550+ horsepower. This scraper bowl width and height is the same as the 3013E. The bowl’s length is simply 12″ longer, increasing the heaped capacity to a productive 34 cubic yds. The 3413E 13ft width of cut does an excellent of cutting a wide range of material. Most large capacity scrapers under a 14ft transport width have a 12ft cutting width.
The direct mount scraper 360-degree swivel hitch is closely coupled to the specialized tractor drawbar, which provides better weight distribution between the tractor front and rear axles.
The weight of 3/4″ front hydraulic connecting hoses is supported by a spring-loaded hose carrier, providing an ideal coupler connection between the tractor and the scraper. This reduces premature coupler wear and accidental coupler “pop-out” from hose weight or binding while operating.
A thick rubber pad keeps the couples off the ground when the scraper is not in use.
The combination of 3413E spacious 74.25″ front opening and the 25.62″ ground clearance, the material can exit the scraper unobstructed, which reduces double ejecting thicker material. Allowing the operator to place material exactly where it is needed, which increases your daily production.
We lowered the connecting point of the front section trailing arms to the scraper bowl down near the blade to provide easier pull while reducing the duck-walking while loading. Allowing the operator to maintain a higher loading speed, more constant tractor RPM, which translates to larger payloads.
The 3413E requires three hydraulic remotes to operate the machine. One circuit controls the lift cylinders. The second circuit controls the apron and the third circuit operated the ejector system. This allows the operator full control of all the functions independently.
The multiple holes within the rear frame enable the operator to position rear axles in numerous positions. Select to place all the tires to be “in-line” for increased compaction or “offset” for better floatation and less mud build-up. So, regardless of your soil condition, there is a tire package available to keep you floating on the soil and moving forward.
Daily maintenance is short work, whereas there is only six daily grease points located on the front hitch. The ejector wall is guided with large plastic blocks, and all the pivot joints, cylinder pins, and floor rollers utilize oversized pins with self-lubricating bushings.
This monthly repayment estimate is provided by Overdrive Commercial Funding Pty Ltd (Australian Credit License: 389328) This estimate is based on a Chattel Mortgage, which is only available where the purchaser of the item intends to use the item for primarily commercial use. The term of this loan is based 60 months with 30% residual & subject to qualifying commercial assets and credit criteria. Fees and charges are not included in this estimate and may apply. If the item is a vehicle and is not listed with a drive away price, any repayment estimate does not include additional costs, such as stamp duty and other government charges. The term of this loan is 60 months. This estimate should be used for information purposes only and is not an offer of finance on particular terms. This repayment estimate is the estimated lowest repayment available from Overdrive Commercial Funding Pty Ltd’s panel of lenders and products for this specific item each day, and includes several assumptions about the item, purchaser, and loan specifics. All loans are subject to eligibility criteria and Overdrive Commercial Funding Pty Ltd loan approval process. A specific quote including details of all fees and charges, or loans for items with primarily or wholly personal use can be obtained via overdrivefunding.com.au or by calling 1800 954 124.
Your current browser cannot run our content, please make sure your browser is fully updated or try one of the browsers below.
Get Financing
